Why is there no plugs in Irish bathrooms?

Why is there no plugs in Irish bathrooms? Special precautions are necessary in the bathroom because the wet surroundings pose a greater risk of electric shock than anywhere else in the house. For this reason, no sockets other than specially designed shaver outlets are allowed in bathrooms.

Special precautions are necessary in the bathroom because the wet surroundings pose a greater risk of electric shock than anywhere else in the house. For this reason, no sockets other than specially designed shaver outlets are allowed in bathrooms.

Should electric showers be turned off?

Risks. Although it is usually OK, many electricians advise leaving the switch turned off when not in use to prevent a permanent source of high-currents.

Why is there no plugs in Irish bathrooms? – Related Questions

Why do electric showers have a pull cord?

Shower pull cord switches are installed to isolate power to an electric shower, typically mounted on the ceiling and operated by pull chain. A shower switch is used to safely isolate the electrical supply if maintenance is required to the appliance, and should be adequately rated to the relevant amps required.

How far away does a switch need to be from a shower?

Is there a minimum distance a switch has to be from a residential shower / tub? There is no NEC specified distance. The only restriction is that the sw cant be “in” the shower/tub area- see 404.4(C).

Can a light switch be above a sink?

Can you get a light switch installed near a sink in your kitchen or bathroom? In most instances, indeed, you can.

Can you put a light switch next to a sink?

National Electrical Code says that the receptacle must be within 3′ of the outside edge of the basin, but not more than 12″ below the top of the basin (210.52(D)). It also states that the receptacle can be installed in the countertop, but must not be in the face-up position (406.5(E)).

Where should a light switch be placed in a bathroom?

Where to Install Bathroom Light Switches. It is best to locate the bathroom light switch just inside the entry door to the bathroom.

Why do some bathrooms have the light switch outside?

Minerals in water conduct electricity, so messing with electric items when you’re wet is a potential safety hazard. If your hands are damp when coming contact with a live wire, your skin has a harder time resisting the current, putting you at a higher risk of serious injury.

Why are European bathroom light switches on the outside?

It can also for fire codes: A dark room is easier to enter when you can turn the light on from outside, rather than fumble around in the dark looking for the switch. This isn’t just for bathrooms where I’m from.

Can you have a switch next to a shower?

The NEC requires that switches not be installed within the confines of shower and tub areas, unless as part of a shower assembly, points out This Old House. In other words, unless the switch is already built in to your shower assembly from the manufacturer, adding a switch inside a shower is a code violation.

How far does a light switch have to be from a water source?

Answered by Sarah, Electrical Safety Expert

There is no specific requirement for a distance between electrical outlets and sources of water like kitchen sinks, but we advise that you allow at least 30 cm from water or heat sources, where possible.

Can a light switch be outside the room?

It can be anywhere you want unless required to be there by some other code. The NEC doesn’t specify a location as this is a design issue.

How high should a switch be off the floor?

So what height do light switches have to be in a home? For a majority of rooms, builders tend to place the bottoms of light switches 48 inches above the floor. This is a comfortable height for most home dwellers when sitting or standing, plus it makes it easier to install switches during construction.

How high off the floor should a light switch be?

While the NEC doesn’t specify the height of switches, most follow a standard procedure. Typical placement puts them at 48″ on-center. Exceptions exist for homes where wheelchair-accessibility is a major concern. In this case you can place them around 40-inches high off the floor.

Why do electricians install outlets upside down?

Electricians may position the outlet in an upside-down position so that you can quickly identify the switch-controlled receptacle. Since it stands out visually to most people right away – it provides convenience to the occupants to easily remember which outlet is switch controlled.

How many outlets should be in a bedroom?

According to US regulations, no single point measured along the floor line of the room walls should be more than 6 ft away from an electrical outlet. This means that a standard, 12 x 14 ft room needs at least 4 to 6 electrical outlets, depending on the wall space.